japanese / english

A Safety Valve is very important and is used for relief of abnormally increased high pressure to avoid a burst, explosion and rupture of a pressure vessel, tank, and pipeline etc, therefore, very careful selection with a customer given specification is indispensable. Our manufacturers are always check and study customer's specification and design, then repeat enough function test before delivery.

£

This is used for separation steam and drain in a pipeline and a vessel to avoid heat loss and drain separation in a gaseous pipe line like air drain trap.

£

Pressure Reducing Valves are used for regulating outlet pressure of any fluid including steam, air and gas. And in case of requesting quotation or order placement, specification shall be attached with RFQ or P.O. sheet.

£

Temperature Regulating Valves are used for regulating temperature, heated or cooled, in a vessel or pipe line. Normally heating medium is steam which pass through the regulating valve. Also medium or fluid such as water, air etc and fluid to be heated or cooled shall be clearly mentioned on the specification to choose material of the valve itself and sensor bulb.

£

This is installed in a pipeline to confirm easily if a medium is flowing or not. Flapper type and Ball type sight glass are popular.

£

	| VALVES | FITTINGS | FLANGES | PIPES & TUBES | PIPE BENDS | GASKETS | BOLTS & NUTS | STRAINERS | SAFETY VALVES | | STEAM TRAPS | PRESSURE REDUCING VALEVES | TEMPERATURE REGULATING VALEVES | SIGHT GLASSES | LEVEL GAUGES | | FLOW ELEMENTS | MECHANICAL PARTS | HEAT EXCHANGERS | OTHERS |

Copyright (c) ESCO LTD. All Rights Reserved.

|@TOP PAGE@|@Contact Us